机械重复刻划工艺的加工硬化试验研究
2019-06-19
作者：史潮潮1，石广丰1，史国权1，2，王子涛1，丁艳春1
单位：1长春理工大学；2中国科学院苏州生物医学工程技术研究所
摘要：为了验证机械重复刻划工艺对成形材料加工硬化的影响，分析了机械重复刻划中加工硬化层的组成及试验测试方法，借助扫描电子显微镜(SEM)检测正交刻划所得试样横截面方向的微观组成，研究了加工硬化层的显微组成和加工硬化层深度影响规律；利用显微硬度仪试验方法研究、验证不同刻深组合对机械重复刻划过程中加工硬化层厚度和加工硬化程度的影响关系。
关键词：机械重复刻划；加工硬化层；正交刻划；显微硬度
中图分类号：TG63；TH161文献标志码：ADOI：10.3969/j.issn.1000-7008.2019.06.021
Experimental Study on Work Hardening of Mechanical Repetition Ruling Process
Shi Chaochao，Shi Guangfeng，Shi Guoquan，Wang Zitao，Ding Yanchun
Abstract:In order to verify the effect of mechanical repetition ruling on the work hardening of formed materials，the composition of the work hardening layer and the test method are analyzed.The microstructure of the sample in the cross section direction with orthogonal ruling is detected by means of scanning electron microscope (SEM).The microstructure of working hardening layer and the influence of working hardening layer depth are also studied.The effect of different ruling depth combinations on the thickness and degree of work hardening in the process of mechanical repetition ruling are studied and verified by means of microhardness instrument test method.
Keywords:mechanical repetition ruling；work hardening layer；orthogonal ruling；microhardness